Kraus, T-Rex 63.5mm Pullback Plate. Black

Description

The T-Rex handlebar pull back plate bolts to the top of the triple tree to relocate the bar mounts towards the rider 2.5" (6.4cm) to improve the ride and to clear the Navigation screen and stereo so you can run straight risers or T-bars on Street Glides and Electra Glides and others with Batwing fairings.
- The T-Rex Plate (body only) adds 1" (2.54mm) of total height to the bar/riser
- Will fit Road Glides with modifications
Note: When running the Kraus T-Rex pullback plate you can not use your stock Key Switch/Steering Lock so you will need to relocate the switch or fully remove it with an optional CVO Ignition Flash done by your local HD dealer. Check with your local shop or dealership for options. Some bikes can be reprogrammed to not need the key switch at all.
Note: When running Kraus Isolated Risers then this kit has everything you need to have the most solid and best-performing setup.
Note: If you are NOT running Kraus Isolated Risers you will need a set of replacement bagger polyurethane bushings to install under your risers in the T-rex Plate.
Note: 24-up models with contact stock nacelle. Will fit with Kraus top clamp / top triple tree.

Specifications

Fitment

00-25 FLT/Touring

Part numbers